Leica has announced that all new M system lenses will carry a new 6-bit code (painted in black/white dots) which will allow the upcoming digital M camera to identify which len is being used (up to 64 in 6-bit coding) and also to store this information in image metadata. As well as applying this coding to new lenses Leica has announced an upgrade service which allows owners of existing M series lenses to have the coding written onto each lens at a cost of 95 EUROs. The press release also hints that the new M series digital will appear in the second half of 2006 (at Photokina no doubt).

Press Release:

New 6-bit coding of Leica M system lenses for image optimization
in connection with the planned digital camera model

Leica Camera AG, Solms will be giving the lenses of the Leica rangefinder system a new code on the bayonet ring in future to enable the planned digital Leica M camera to recognize the lens type. The information on the lens that is being used helps the camera to optimize image quality. All lenses leaving the factory from July 1st, 2006 onwards will have the new coding, although they can still be fully used with the current analog cameras LEICA MP and LEICA M7 as well as classic models built after 1954. Lenses in the current range as well as many earlier models can be retrofitted at the cost of the owner to benefit from the image optimization in the camera. The lenses are compatible with the planned digital M camera even without retrofitting, except that the additional features cannot be used.

The lens coding is called ‘6-bit coding‘ because six fields in the bayonet ring are marked in black or white to represent a number from 1 to 64 in binary code. The planned digital M camera reads this information optically and can identify the lens on the basis of this code. Apart from the improvement in image quality, this information is also written into the EXIF image file.

“On account of their legendary quality, nearly all Leica M lenses are ideal for digital use. However, the new 6-bit coding also uses the performance reserves in the image processing of the camera to give our customers the excellent image result they expect from Leica,“ says Rainer Bültert, product manager for the M system at Leica Camera AG.

Lenses bought in the past will be converted at the request of the customer for 95 euros at the Customer Service of Leica Camera AG in Solms or the Leica agencies of other countries.

Many of the lenses made from 1963 onwards can be converted. A list of such models is available on the following pages or from the Leica Info-Service (Tel. 06442/208-111). The only lens in the current range that will not be given a 6-bit coding is the LEICA APO-TELYT-M 135 mm f/3.4. It is not codable later, either, as its extension factor of 1.33 makes it unsuitable for use on the planned digital M camera. The launch of the digital Leica rangefinder camera is planned for the second half of 2006.

List of present lenses that can be updated

Discontinued lenses that can be updated

Besides those presently available, even lenses that were discontinued quite a while ago can be updated (see list below). Since Leica Camera AG regards system compatibility as a vital virtue, many lenses introduced as long ago as 1963 can be updated.

Please ask either your authorized Leica dealer or Customer Service in Solms to perform the update. The latter will be happy to inform you on this subject. Customer Service is available under the phone number +49 (0)6442 208-189.